Troy-Bilt Pony 42 in. 547cc 7-Speed Manual Gas Riding Lawn Mower

Troy-Bilt Pony 42-Inch Riding Lawn Mower with 547cc Troy-Bilt Engine and Step-Thru Frame

The Troy-Bilt Pony 42-inch riding lawn mower is designed for homeowners with small to medium-sized residential properties who want a reliable conventional riding tractor with a practical 42-inch cutting deck, an accessible Step-Thru frame, and a straightforward 7-speed transmission for regular seasonal lawn maintenance on properties up to 1.5 acres. Powered by a 547cc Troy-Bilt single-cylinder engine, the Pony 42 delivers consistent power output matched to the cutting and drive demands of a 42-inch twin-blade stamped steel deck under standard residential mowing conditions. The Pony 42 combines the traditional riding tractor steering wheel layout with convenience features that make regular mowing sessions easier, including a dash-mounted 7-speed Shift-On-The-Go transmission control, automatic headlights, a cup holder, and the Step-Thru frame design that lowers the entry point for easier mounting and dismounting.

547cc Troy-Bilt Engine

The 547cc Troy-Bilt single-cylinder engine provides consistent power output for standard residential mowing on flat to gently sloped terrain. The engine features electric key-start ignition, a 150 CCA 12V lead-acid battery, fully pressurized lubrication, a dual-element air filter, and an oil filter for extended service intervals. The 1.36-gallon fuel tank supports standard mowing sessions on properties up to 1.5 acres, and the Choke-A-Matic system simplifies cold starting throughout the seasonal temperature range. Routine maintenance tasks including oil changes, air filter replacement, and spark plug service are supported by accessible service points and standard parts availability through the Troy-Bilt service network.

42-Inch Twin-Blade Stamped Steel Deck

The 42-inch stamped 13-gauge steel cutting deck uses a two-blade configuration to cover the full cutting width with overlapping blade paths, producing a consistent and even cut across standard residential turf types. The deck is designed for side discharge operation, with a mulch kit available separately for operators who prefer to return clippings to the soil. The cutting height is adjustable across 5 positions from 1.5 to 4 inches using a hand lever, allowing the operator to set the cutting level according to grass type and seasonal requirements. The 42-inch width is well suited to properties up to 1.5 acres, covering more ground per pass than a walk-behind mower while remaining compact enough to navigate standard residential lawn layouts.

7-Speed Shift-On-The-Go Transmission

The Pony 42 uses a CVT transmission with a 7-speed Shift-On-The-Go hand lever control mounted on the dash panel, allowing the operator to adjust ground speed without stopping the machine or interrupting the mowing pass. Forward speeds up to 5.5 MPH and reverse speeds up to 2.5 MPH cover the practical range for standard residential mowing including efficient straight-line cutting on open sections and slower controlled maneuvering near obstacles. The transmission housing is aluminum, and the rear axle measures 3/4 inch for durability under the operational demands of regular residential use.

Step-Thru Frame and Operator Platform

The Step-Thru frame is a structural design feature that lowers the entry point on the side of the machine, allowing the operator to mount and dismount more easily compared to conventional riding tractor frame designs. This lower access point reduces the physical effort required to get on and off the mower during the session and provides additional legroom for the operator. The seat is a low-back type with knob adjustment, and the operator platform includes grit floor mats for secure footing. A cup holder is built into the control layout for operator convenience during longer mowing sessions, and the standard automatic headlights improve visibility in low-light conditions.

Conventional Steering and Build Quality

The Pony 42 uses a conventional steering wheel layout with an 18-inch turning radius, providing familiar and intuitive directional control for operators who prefer the riding tractor experience. The frame is robotically welded for structural integrity, and the front pivot bar is constructed from 14-gauge steel. The chassis includes corrosion protection, a rear tow hitch for attaching compatible accessories, and disc brakes for reliable stopping power. The overall construction reflects Troy-Bilt build standards for residential riding tractors intended for regular seasonal use over multiple ownership years under normal operating and maintenance conditions.

Specifications

Engine: Troy-Bilt 4X90H0, 547cc, Single Cylinder

Starter: Electric, Ignition Key
Fuel Tank: 1.36 Gallons US
Battery: 12V, 150 CCA Lead Acid
Transmission: CVT, 7-Speed Shift-On-The-Go Hand Lever
Forward/Reverse Speed: 5.5 MPH / 2.5 MPH
Cutting Width: 42 inches
Deck Construction: Stamped 13-Gauge Steel, 2 Blades
Deck Engagement: Manual Lever
Cutting Height Range: 1.5 to 4 inches, 5 Positions, Hand Lever
Turning Radius: 18 inches
Frame: Robotically Welded
Front Pivot Bar: 14-Gauge Steel
Rear Tires: 20 x 8 - 8
Front Tires: 15 x 6 - 6
Seat: Low-Back with Knob Adjustment
Additional Features: Automatic Headlights, Cup Holder, Rear Tow Hitch, Operator Presence System
Model Number: 13A877BSA23
Warranty: 3 Years Limited (Residential, Frame, Front Axle, Deck Shell, Engine)
Ideal For: Small to medium residential lawns up to 1.5 acres, homeowners seeking a reliable conventional riding tractor with Step-Thru access, operators preferring a 7-speed manual transmission with dash-panel speed control

What Is Included

This listing includes the Troy-Bilt Pony 42-inch riding lawn mower as described. Please review the full product specifications and warranty details before purchase. For questions about shipping, delivery timeframes, or product information, contact our support team directly.